TTI FTE-7000A Operation & User’s Manual

45, FTE-7000A User's Guide Rev A 5/201440 Chapter 10 Video Scope Fiber End Face Criteria Table for Angled PC Polished Connetors Fiber End Face Criteria Table for Ultra PC Polished Connetors Zone Description Diameter Allowable Scratches (Width) Allowable Defects (Diameter) A Critical Zone 0µ…

48, TTI FTE-7000A 43FTE-7000A User's Guide Rev A 5/2014 Chapter 12 Specifi cations Wavelength 850, 1300, 1310, 1490, 1550, and 1625nm (±20nm) Dynamic Range 26/27dB MM,36/35/35/35dB SM Pulse Width 5 - 20,000 ns Units of Measurement Kilometer, Kilo feet and Mile Event Dead zone 1m Attenuation Dead Zone 4m R…

39, FTE-7000A User's Guide Rev A 5/201434 Chapter 9 File Management 9.2 File management Operation File Management File Drop Down Menu To open the drop down menu under fi le, with fi le highlighted, press select or press the down button. Use the down or up arrow to move through the drop…

46, 41FTE-7000A User's Guide Rev A 5/2014 Chapter 11 Loss Test Set The FTE-7000A is equipped with a Loss Test Set which includes the power meter and CW source. On the home screen, touch the LTS icon or use the left or right button to highlight the LTS Icon and press SELECT. All OTD…

10, 5FTE-7000A User's Guide Rev A 5/2014 To operate the cursors, use the left and right buttons. Press the A/B button to toggle between A and B as the active cursor. To view the Fib-R-Map and event table, press , use the left and right buttons to highlight the (schematic view) icon…

29, FTE-7000A User's Guide Rev A 5/201424 The LSA area and cursor are set too early. The right most green LSA indicator line is not over laying the back scatter of the trace properly Fig 7.7 The LSA area and cursor are set too late. The left most green LSA indicator line is not …