TSL LTA-X48M Operation & User’s Manual

37, 32 Snapshot：Click bottom “snapshot” to screenshot the image and store it to SD card. if select manual storage, appears dialog box “Input Name” , user-defined the files name(by Chinese character, English letter ,or digit ) to save in SD card, if select “Auto- storage”，the test…

16, TSL LTA-X48M 11 3.2.3 HD Coaxial camera connection * CVI, TVI, AHD camera are classified as HD coaxial cameras. Hereby the following instruction of how to connect TVI camera to the tester is also applied to CVI, and AHD camera. (1) Connect the TVI camera's video output to…

13, 8 Notice: When the Charge Indicator turns off, the battery is approximately 90% charged. The charging time can be extended for about 1 hour and the charging time within 12 hours will not damage the battery. Notice :Press the key sev…

7, 2 2. IP Camera Tester Introduction 2.1 General The 4.3 inch IPS touch screen IP camera monitor is designed for maintenance and installation of IP cameras, analog cameras, TVI, CVI AHD, cameras, as well as testing 4K H.264 /4k H.265 camera by mainstream, The 960x540 resolut…

78, 73 measurement app, screen show the current adaptor input voltage and power. Note: the current 12V input measured power is the battery charging power and the device working power, the measured power will change depending on the different of battery power and backlight brightness. …

48, 43 Protocol and support more than thirty PTZ protocols. Such as Pelco-D,Samsung,Yaan,LiLin,CSR600,Panasonic,Sony-EVI etc. B. Port Click and move, to “port” Select the communication port for the PTZ camera controlling (RS485). C. Baud Move the yellow cursor to “Baud…