Winco DSE 890 WebNet Installation Instructions Manual

1, Winco DSE 890 WebNet 113273-00 60710-131 INSTALLATION INSTRUCTIONS DSE 890 WebNet® GATEWAY This instruction sheet is provided in assisting in the installation of the DSE890 module. For a complete DSE installation and operation manual please go to DSE website @ www.deepseaplc.com. Document # 057-165. RS485…

2, 213273-00 60710-131 DIMENSIONS Overall Size 85 mm x 149 mm x 51 mm (3.35” x 5.85” x 2.01) Weight 120g (4.23 oz) Mounting Type DIN rail or chassis mounting Din Rail Type EN 50022 35mm type only Mounting Holes M4 clearance Mounting hole centers 73 mm x 137 mm (2.89” x 5.39”) …

3, 313273-00 60710-131 SIM CARD HOLDER (DSE 890 3G GATEWAY ONLY) HOW TO INSERT THE 3G (OR 2G) GPRS SIM CARD Pull back the upper cover. It will click as it unlocks. Open the SIM card holder, it hinges towards you. Slide the SIM card, en- suring the “edge cutout” is as shown. Close t…

4, 413273-00 60710-131 TYPICAL WIRING DIAGRAM SYSTEM OVERVIEW DSE WEBNET SERVER DSE CONTROLLER(S) Connection to DSE Controller(s) USB RS232 RS485 Ethernet • • • • Connection to DSE WebNet Server Ethernet GPRS (DSE890 only) • • …

5, 513273-00 60710-131 CONTROLS AND INDICATIONS RESET PUSHBUTTON Reset Push Button Access Hole LED1 LINK (Server) Status LED2 USB Host Status LED3 RS485 Status LED4 RS232 Status Press and hold the button to activate the reset sequence: 1. Press and HOLD the reset pushbutton. 2. All LED’s light…

6, 613273-00 60710-131 ADDING THE CONTROLLER TO THE DSEGATEWAY To ensure newly added controllers are recognised by the DSEGateway®, the following steps must be followed. Failure to do so may result in communications failure, indicated by a RED communications port LED. • The DSEGateway�…