Sercomm YN400 Operation & User’s Manual

8, 3 Chapter 3 Board Description This Chapter provides board description for the Home Monitoring Gateway. Overview NA401 is a home gateway/automation, monitoring platform based on the Broadcom chip BCM5354. Below is an image of the board showing different connection and int…

6, 2 Chapter 2 Initial Installation This Chapter covers the software installation of the Home Monitoring Gate- way. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. Procedure 1. Choose an Installation Site Select a suitable place …

5, Introduction Rear Panel Reset This button has two (2) functions: • Reboot. When pressed and released, the Home Monitoring Gate- way will reboot (restart). • Clear All Data. This button can also be used to clear ALL data and restore ALL settings to the factory defaul…

4, Sercomm YN400 Wireless Adapter User Guide LEDs Front-mounted LEDs The Home Monitoring Gateway has 8 LEDs. POWER • On (Green)- Power On • Off - Power Off • On (Amber) - POST (power on self test) failure or device malfunc- tion ETH (1~2) (Green) • On (Green)- LAN connection establi…

12, Wireless Adapter User Guide Router/AP configuration To configure the gateway settings for the NA401, the user simply connects the host to the LAN port. Then using Internet Explorer connect to the URL http://192.168.1.1 The default user name and password is: User name: (blank) Password: admin…