SEOWON INTECH SWC-3100 Operation & User’s Manual

9, 9 2. A Simple WiMAX gateway Implementation Included in the software development package is the sample WiMAX gateway implementation. The target system has a WiMAX interface at one end and a Ethernet interface at the other end. The embedded connection manager automatically ma…

15, SEOWON INTECH SWC-3100 15 2.4.1. Network configuration If you select “WCM configuration” in the left window, then you can change WCM configuration. The content will show up in the right window. The detailed explanation for the content is done in section 5.1 and 5.2. Choosing WIMAX…

11, 11 This command is used to turn off WiMAX modem and RF. Before doing so, it disconnect from the network if it is already connected. 2.2.2.4. wb_ne This command is used to initiate network entry procedure when the device is in STANDBY state. This command is discarded if the device is in…

2, 2 Contents 1. Simple CPE Overview ......................................................................................................3 1.1. Product Introduction...............................................................................................3 1.2. Packaging Contents ..…

20, 20 2.4.2. Firmware upgrade You can update the kernel image, file system image, and parameter block image with the web browser. This also can be updated in RedBoot mode, but it cannot be used in commercial product. So, “System Menu” in left window help you to update th…