XU1 XDD-180 Operating Instructions Manual

1, 1–23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.xuone.com.au XU1 Power tools XDD-180 0916 Operating Instructions XDD-180 18V Cordless Drill Driver …

2, 1 2 3 4 5 6 9 8 7 A B 1 10mm Keyless Chuck 2 Torque Adjustement Collar 3 LED Worklight 4 Drill Driver 5 Forward / Reverse Selector 6 Variable Speed Trigger 7 Battery Release Tab 8 Belt Clip 9 18V Li-Ion Battery 3 …

3, Input Voltage: 18V Battery Capacity: 1.5Ah Li-Ion Chuck Size: 10mm No Load Speed: 0-700/min Torque Settings: 21 Max. Torque: 16Nm Charge Time: 3-5hours Tool Weight: 1.1kg…

4, MAINTENANCE Keep the ventilation slots of the tool clean at all times using a soft brush or dry cloth. If possible prevent foreign matter from entering the vents. After each use, blow air through the tool housing to ensure it is free from all dust particles that may build up. If …

5, SAFETY INSTRUCTIONS ALWAYS WEAR EYE, FACE AND EAR PROTECTION Description of symbols Caring for the environment General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, re and/o…

6, XU1 XDD-180 Charger and battery pack safety instructions Drill Driver Safety Warnings This tools charger is double insulated; therefore no earth wire is required. 2 1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product us…