Wildgame SC20B20-7 Operation & User’s Manual

25, Wildgame SC20B20-7 page 25 FCC STATEMENT Product Name: Game Trail Camera Trade Name: Wildgame Innovations Model# SC20B20-7 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any…

26, page 26 602 Fountain Parkway Grand Prairie, TX 75050 800.847.8269 “Wildgame Innovations” and the “Button Logo” are trademarks of Wildgame Innovations, LLC. “Flextime” is a trademark of WGI Innovations, LTD. …

23, page 23 Format SD Card Having trouble with your SD card? Try this. 1. Connect the SD card to your computer. If your computer has an SD card slot you can insert the SD card directly into the port. NOTE: If you are using a MicroSD card, you will need an adapter to allow it to fit into st…

14, page 14 1. To select the time of day for camera operation, use the UP/DOWN arrows to scroll to PIR ACTIVE on the left menu bar and press OK. 2. 3. Use the LEFT/RIGHT arrows to select if you want 24HR, DAY or NIGHT imaging. When your preferred method is highlighted, press OK to selec…

16, page 16 1. 1. To adjust the resolution of still images, use the UP/DOWN arrows to scroll to STILL RES on the left menu bar and press OK. To select the size of photos/vid- eos captured by the camera, use the UP/DOWN arrows to scroll to PIC/VIDEO and press OK. 2. 2. Use the LEFT/RIGHT…

21, page 21 Retrieving Images Method 1: Leave SD card in camera A. First, make sure that the camera is powered OFF. Next, plug the USB cable into the camera and then into the USB port on your computer. Once this is complete (in this order only), then power the camera ON. …