Wiener MPOD LV Technical Manual

59, Option 1) Check “Erase Fw.” (erase firmware) and “Erase Bl.” (erase bootloader) if the current firmware is older than 2.*.0.15 or it is a firmware without bootloader. After that push the button “browse” to scan the flash. In some minutes select the new bootloader filein the automa…

16, EHS Series, 8/16 channels with common ground Type Channels V max I max V res I res Ripple EHS 40100x_504 4 10kV 0.5mA 20mV 1nA <30mV EHS 8080x_105 8 8kV 1mA 20mV 2nA <30mV EHS 8060x_105 8 6kV 1mA 12mV 2nA <30mV EHS 8040x_205 8 4kV 2mA 10mV 4nA <10mV EHS 8030x_305 8 3kV 3mA 10…

54, | | | u1946(1947), u1947(1948), u1948(1949), u1949(1950), u1950(1951), u1951(1952), | | | u1952(1953), u1953(1954), u1954(1955), u1955(1956), u1956(1957), u1957(1958), | | | u1958(1959), u1959(1960), u1960(1961), u1961(1962), …

37, "80 10 " /* outputOn, outputRampUp */ /* a load has been switched on channel 0 to bring them in state CC current limited */ snmpget -Oqv -v 2c -m +WIENER-CRATE-MIB -c public 192.168.2.25 outputStatus.u100 "80 20 " /* outputOn, outputCurrentLimited */ . snmpget -Oqv…

48, snmpget -Oqv -v 2c -m +WIENER-CRATE-MIB -c public 192.168.16.222 outputStatus.u100 "04 " /* outputFailureMaxCurrent */ snmpset -Oqv -v 2c -m +WIENER-CRATE-MIB -c guru 192.168.16.222 outputSwitch.u100 i 10 clearEvents snmpsetx -Oqv -v 2c -m +WIENER-CRATE-MIB -c guru 192.168.…