Retsch PM400 Operating Instructions Manual

14, 08.02.2012 Retsch GmbH 14 Doc. Nr. GB 98.535.9999 Emergency unlocking A key for the machine is included in the delivery with which the PM400 can be manually opened if there is a power failure. Remove cap K (I) Insert the (S) key into the O opening on the …

10, Retsch PM400 08.02.2012 Retsch GmbH 10 Doc. Nr. GB 98.535.9999 Transport and installation Packing Packing is adapted to the transport route and conforms to the generally applicable packaging guidelines. Please keep the packing material for the duration of the guarantee …

8, 08.02.2012 Retsch GmbH 8 Doc. Nr. GB 98.535.9999 Technical data Machine type designation: PM400 Use according to the intended purpose Retsch ball mills are used for milling and mixing soft, medium-hard up to extremely hard, brittle and fibrous matierals. Both dr…

30, 08.02.2012 Retsch GmbH 30 Doc. Nr. GB 98.535.9999 Wearing parts Spider with thrust piece PM400 Art. No. 22.661.0002 For PM400 3x locking strip Art. No. 03.623.0002 6x countersunk screws Art. No. 08.643.0108 M12x25 DIN7991-10.9-A2K For PM400 PM400…

13, 08.02.2012 Retsch GmbH 13 Doc. Nr. GB 98.535.9999 Operation Connecting the power supply Ensure that the voltage and frequency of your mains supply correspond to the values on the type plate of the PM400. Plug the mains cable in the receiving socket Au on the rear s…

26, 08.02.2012 Retsch GmbH 26 Doc. Nr. GB 98.535.9999 and then change into the sub-menu: DETERMINE NO-LOAD POWER Clamp the milling cup – still without milling material and milling medium – firmly in the machine. Start the machine. The process now …