Retrotec DM32 Manual 

1, [Channel A] pressure difference across blue “input” and red “ref” ports [Channel B] ….across green “input” and yellow “ref” ports Tap in the boxes on the touch sensitive Home screen Control fan speed Computer connection with Ethernet cable Fan speed, t…

2, actoolsupply.com actoolsupply.com Retrotec US1312 Blower Door System Retrotec US1311 Blower Door System Retrotec US1211 Blower Door System Retrotec US1112 Blower Door System Retrotec US1111 Blower Door System Retrotec US1102 Blower Door System Retrotec US1101 Blower Door System Retro…

3, Tap [Channel B] Plug in color- coded tubes Connect ethernet-style Cable from gauge to fan 1: Make connections and power On 3: Choose desired Result 2: Set Range or Device Tap for options Tap Tap to return Home Tap for more choices to see Device options Press for 2 …

4, Retrotec DM32 to target a pressure to set to a speed Tap to “Hold”, Tap to release OR Tap to turn fan Off c a b 5: Run a test Tap to change Result to decrease or increase c Tap to calculate Result exactly at (@) the “Set Pressure” 4: Set Area and Volume Tap and [Set] volume f…

5, If connecting to Hub/Switch or PC, tap [Mode] and select “Static “. For 2 nd gauge enter IP Address: 169.254.1.2 For 3 rd gauge enter IP Address: 169.254.1.3 …… Tap [Capture Baseline] to begin sampling Tap [End Capture] after 15 to 60 seconds The displayed Baseline pressure is …