RetroSound Motor 6 Operation & User’s Manual

19, 18 Copyright © 2017 Retro Manufacturing, LLC OPERATING YOUR RADIO TONE CONTROLS This sub-menu allows advanced tonal adjustments, balance and fader controls and the preset equalizer options. To access this sub- menu, press the left front knob (#1). Keep pressing the left front knob to scro…

27, RetroSound Motor 6 26 Copyright © 2017 Retro Manufacturing, LLC USB DEVICE INSTRUCTIONS • Motor 6 will read only FAT32 formatted ash drives. This radio will NOT read NTFS formatted drives. • Motor 6 will read les placed in the root directory rst before playing les in the folde…

5, 4 Copyright © 2017 Retro Manufacturing, LLC WHAT’S IN THE BOX The items shown below are packaged with your Motor 6 box. The items shown below are packaged with your radio face box. Main Wiring Harness (plugs into back of radio) InniMount Brackets Radio Face Power and Speaker Wiri…

24, 23 OPERATING YOUR RADIO Program Type (PTY) This sub-menu only works in Europe (AREA EUR) and allows you select up to 31 pre-dened program types allowing you to nd similar programming by genre. To change your program type, rst make sure the tuner is set to AREA EUR . Then cyc…

13, 12 Copyright © 2017 Retro Manufacturing, LLC INSTALLATION INSTRUCTIONS NOTE: This unit requires +12 volts to both the red and yellow wires to operate properly. Locate the three wiring harnesses: main wiring harness, power wiring harness and speaker wiring harness (see “What’s i…

37, 36 Copyright © 2017 Retro Manufacturing, LLC REPLACEMENT PARTS If you need replacement parts, contact us at [email protected] or call 702.483.2222 (See “What’s in the Box” on page 4 to conrm the part(s) needed). NOTE: If you return a radio to us for credit, any missing par…