Tenda 3G186R Operation & User’s Manual

48, Mobile Wireless Modem 48 you tried all the above. 2. Q: I forget the login password to my device, what should I do? In this case, you need to restore your device to factory default settings. To do so, Press the hardware button RESET on your device for over 7 seconds…

32, Mobile Wireless Modem 32 IP/Port Filter: Select Enable/disable from the drop-down list. Default Action: Select “Pass” to let data that does not match any set rule go through the device or select “Drop” to discard it. Destination IP Address: Enter the IP address…

37, Mobile Wireless Modem 37 7.5.1 Time & Date This section assists you to set the device’s system time and date; you can either select to set the time and date manually or automatically obtain the GMT time from the Internet. NOTE: The configured time and date information lose…

21, Mobile Wireless Modem 21 5.2 Connection Settings The device offers 3 connection modes: Connect on Demand, Connect Manually, and Connect Automatically (default).  Connect Automatically: Connect automatically to the Internet upon device startup or disconnection from t…

20, Mobile Wireless Modem 20 5.1.2 Manual APN Select Manual APN as shown below to modify required info, if your ISP provides you a fixed APN. 5.1.3 LAN IP Address Settings This section allows you to change the device ’ s LAN IP address: 192.168.2.1 by default. On…

49, Tenda 3G186R Mobile Wireless Modem 49 automatically, please ensure that the router's DHCP function is enabled. DHCP can automatically assign an IP address to your computer. If there is no DHCP, please set a static IP address and fill in gateway and DNS, otherwise you cannot access Internet. 5…