Resol DeltaSol BS/3 Manual, Mounting Connection Application Examples Operation Troubleshooting

21, D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd 21 | Maximum tank temperature Once the adjusted maximum temperature is exceeded, the solar pump is switched off and further loading of the tank is prevented to reduce scald risk or system damage. A fixed hysteresis of 4 °R…

25, D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd 25 | Time period - switch-on conditions tDTO: Time period - switch-on conditions Adjustment range: 1 ... 100 s in steps of 1 s Factory setting: 60 s The parameter tDTO is used for adjusting the time period during which the switch-…

32, Resol DeltaSol BS/3 D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd | 32 Distributed by: RESOL - Elektronische Regelungen GmbH Heiskampstraße 10 45527 Hattingen / Germany Tel.: +49 (0) 23 24 / 96 48 - 0 Fax: +49 (0) 23 24 / 96 48 - 755 www.resol.com [email protected] Please note: …

10, D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd | 10 The thermostat function works independently from the solar operation and can be used for using surplus energy or for backup heating. • AH O < AH F thermostat function for backup heating • AH O > AH …

15, D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd 15 | The system screen (active system layout) shows the system selected on the controller. It consists of several system component symbols, which are – depending on the current status of the system – either flashing…

8, D e lt a S o l ® BS/3 © RESOL 10082_deltasol_bs/3.monus.indd | 8 R2 S1 S2 R1 S3 S4 / TR System layout 2 The controller calculates the temperature difference bet- ween collector sensor S1 and tank sensor S2. If the diffe- rence is larger than or identical to the adjusted switch…