ResMed Swift LT Operation & User’s Manual

8, ResMed Swift LT 7 English Troubleshooting Possible reason Solution Pillows won’t seal properly, are uncomfortable or cause red marks Pillows may have been fi tted incorrectly, incorrectly adjusted, or the headgear is too tight. Carefully follow instructions in “Fitting your Swift LT”. Check hea…

9, 8 Technical specifi cations Note: The mask system does not contain latex, PVC or DEHP materials. Pressure–Flow Curve Note: The mask contains passive venting that meets the requirements for protection against rebreathing as specifi ed in ISO 17510-2. As a result of manufacturing variations…

3, 2 Parts of the Swift LT & Ordering Information Complete system 60560 (includes small, medium and large pillows) Frame system (pillows, frame, short tube assembly) S* 60582; M* 60583; L* 60584. Frame assembly (frame, short tube assembly) 60581 S* Small; M* Medium; L* Large. Elbow …

2, 1 English Swift™ LT NASAL PILLOWS SYSTEM Thank you for choosing the Swift LT. Intended Use The Swift LT channels airfl ow noninvasively to a patient from a positive airway pressure device such as a continuous positive airway pressure (CPAP) or bilevel system. The Swift LT is: to be used by ad…

11, Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK See www.resmed.com for other ResMed locations worldwide. S…