Varimixer ERGO100 Operating Instructions Manual

1, A/S Wodschow & Co. Kirkebjerg Søpark 6 DK-2605 Brøndby Phone: +45 43 44 22 88 [email protected] www.bearvarimixer.com Denmark ERGO60 ERGO100 ERGO140 AR200 VL-4 032017 ORDER NO.: 00453 GB Translation of the original user manual OPERATING INSTRUCTIONS …

16, 16 eleCtrICal dIaGramS: 1 2 3 4 5 6 7 8 Side Forrige side: Næste side: Antal sider ialt: Sidst udskrevet: Sidst rettet: Siderev.: Projektrev.: Godk. (dato/init): Konstr. (projekt/side): Tegningsnr.: Sagsnr.:Projekttitel: Kunde: Sidetitel: Filnavn: Sideref.: Målestok: ERGO 140 5 2612-0…

10, Varimixer ERGO100 10 meChanICal ComPonent error: The bowl is too tight or too loose in the bowl arms. Solution: “Adjustment of bowl clamping and centering”, page 12 The tool hits the sides of the bowl. Solution: “Adjustment of bowl clamping and centering”, page 12 Abnormal noise from the lifting ac…

23, 23 Relubricating of lifting actuator spindle on ERGO 60-100-140 Page 3 Lubricate the spindle with grease 60L-100L-140L • Lubricate the spindle with grease of the type Mobilith SHC460 from Mobil. • No other type of grease may be used Spindle tube in place 60L-100L-1…

11, 11 Call uP an error loG of the laSt 10 dISConneCtIonS: The last 10 disconnections due to errors resulting in code can be read on the mixer display: • Press the emergency stop • Press and to browse the log • The diodes on the speed indicator light up. The age of the error is …

5, 5 Control Panel Vl4: Bowl up To raise the bowl, press the + + elds simultaneously and con- stantly until the bowl reaches the top. Start/Stop Bowl down Lowers the bowl once the mixer has stopped. If this eld is activated while the mixer is running, the bowl will be lowered auto…