Specifications:833/833351-cx500.pdf file (11 Oct 2023)
|
Roland CX-500 Plotter, Printer PDF Operation & User’s Manual (Updated: Wednesday 11th of October 2023 02:33:41 AM)
Rating: 4.4 (rated by 97 users)
Compatible devices: VS-540i, CJ-540, TrueVIS VG-640, VersaCamm SP 540v, VersaART RS-640, LEC-300A, MODELA MDX-15, SJ-745EX.
Recommended Documentation:
11, 11 (1*) Position of the pinch roller (middle) when using material with a width of 30 in. or more. (1*) 46 in. (approx. 1178 mm) 6 in.(approx. 152 mm) 12 in. (approx. 305 mm) 18 in. (approx. 457 mm) 24 in. (approx. 610 mm) 30 in. (approx. 762 mm) 36 in. (approx. 914 mm) 46 in. (approx. 1178 mm…
24, 24 QUALITY NORMAL HEAVY HEAVY NORMAL HI-SPEED Emphasis on Quality Priority on Speed • When you want cutting to be as attractive as possible • When heavy material is loaded • When you want to cut as rapidly as possible (used together with cutting speed) QUALITY NORMAL UPSPEED 50cm/…
42, Roland CX-500 42 [ ] Key [ ] Key [ENTER] Key [ ] [ ] Key 7 Descriptions of Features 7-1 Key Operations This describes the key operations. Refer to this together with the display-menu flowcharts on the following pages to make settings using the menus. Direct Keys [PRESET] Pressing any …
39, 39 ALIGNPOINT 0mm 0mm CROPMARK SETTING COMPLETED ! CROPMARK SETTING FAILED,SET AGAIN 4 Use the [ ], [ ], [ ], and [ ] keys to move the tool carriage to the left of the crop mark printed on the material. Line up the alignment tool with the center of the crop mark. After the alignment tool has…
30, 30 Pass the material SELECT SHEET ROLL PIECE W 500mm L1000mm 7 Use the operation panel as follows to perform test feed for the material. The material is fed out by the set length. Make sure the material is not crooked. If the material is crooked and looks like it might come loose from the pinch…
44, 44 PRESET PRESET1 [MENU] MENU MODE Press [ENTER] to return to [SELECT SHEET]. Press [ENTER] to start area feed. [ ] [PRESET]: Initialize only preset information. [ALL]: Return to factory-default settings. mm/Inch Adjustment of LCD contrast: 5 to 1 (5 levels) 0 to 1.000 mm (0.025…
#M11R6G: MCD300/93 Guidance
MCD300/93, 37, philips/mcd300-93.pdf
Plasma TV Reference Book #655G76
TH-42PA60A, 162, panasonic/th-42pa60a.pdf
Mitox Lawn and Garden Equipment Manual (#37V45Q)
650DX Premium+, 36, mitox/650dx-premium.pdf
Fujitsu Reference Book: FI-590PRF Operators (#JGZ79B)
FI-590PRF Operators, 17, fujitsu/fi-590prf-operators.pdf
Franklin Reference Book: CPS-100 (#VD2C4H)
CPS-100, 14, franklin/cps-100.pdf
Handbook (RM244V, #917895)
RM244V, 12, adastra/rm244v.pdf
Handbook (HW-12C13, #9671J2)
HW-12C13, 28, haier/hw-12c13.pdf
Microphone TG-X 80 Document, #S1Y3I8
TG-X 80, 12, beyerdynamic/tg-x-80.pdf
ALIBI Tutorial: ALI-BC700G (#383418)
ALI-BC700G, 3, alibi/ali-bc700g.pdf
Recording Equipment AXB-DMX512 DMX512 INTERFACE Handbook, #66XKH9
AXB-DMX512 DMX512 INTERFACE, 32, amx/axb-dmx512-dmx512-interface.pdf
Install the Print and Cut software (ROBO Master Pro) according to the instruction on the screen.Install the Cutting Plotter Controller according to the instruction on the screen.F-2. Press the OK button.F-3. Follow the instructions displayed on the screen and then press t ...
Model & Doc Type: CE5000 SERIES 2
Setup GuideENGIntroductory InformationSeriesSeriesSeriesSeriesQT5-7359-V1 ©CANON INC. 2013 PRINTED IN CHINA1Preparations(P.2)Install the Ink Tanks(P.3)Install the Printhead(P.4)(P.14)Load Paper to Adjust the Printhead(P.5)Store Accessories in the Pockets(P.13)(P.7)Install the Software ...
Model & Doc Type: image Prograf iPF780 Series 16
Table of contents1. Safety precautions… … … … … … … … … … … … … … … … … … … … … … … .… … … .12. Standard accessories… … … … … … … … … … … … … … … … … … … … … … … … .… .33. Install machine… … ...
Model & Doc Type: PCUT SERIES 26
Printer RelocationSoftware Installation31Printer Operations2TroubleshootingRead this manual before attempting to operate the printer.Keep this manual in a handy location for future referencing.This Basic Guide includes three booklets. Be sure to read "Safety Precautions" in the fi rs ...
Model & Doc Type: imagePROGRAF iPF6300S 20
# | Brand | Model | Document Type/File | Pages | File Size | Last Checked |
---|---|---|---|---|---|---|
1 | TE Connectivity | AMS600 |
17 | 13/10 | ||
2 | Ioline | FlexJet |
32 | 12/10 | ||
3 | GRAPHTEC | CE5000-120AP |
108 | 29/12 | ||
4 | MIMAKI | CG-60EX |
110 | 10/10 | ||
5 | MUTOH | SC-PRO |
8 | 26/03 | ||
6 | Canon | imagePROGRAF IPF8000S |
8 | 3 Mb | 06/12 | |
7 | Canon | image Prograf iPF780 Series |
648 | 07/01 | ||
8 | Roland | VS-640i |
52 | 10/10 | ||
9 | Canon | imagePROGRAF iPF9400S |
21 | 6.11 Mb | 03/04 | |
10 | Richpeace | RF-MJ135 |
65 | 17/12 |
# | Brand | Model | Document (PDF) | Pages | Size | Check Date |
---|---|---|---|---|---|---|
1 | Redring | LWSS STAINLESS STEEL |
24 | 0.21 Mb | 23.11.2023 | |
2 | JVC | DLA-HD100 |
55 | 18.10.2023 | ||
3 | ReadyNet | wrt300n-rn |
2 | 14.01.2024 | ||
4 | SnapNrack | Array Skirt |
4 | 24.02.2024 | ||
5 | Zanussi | ZA18 |
10 | 1.08 Mb | 04.10.2023 | |
6 | Metal-Fach | T466 |
42 | 24.03.2024 | ||
7 | JJ Cole | newport via i470 |
52 | 10.01.2024 | ||
8 | TGB | blade 300 |
218 | 11.03.2024 | ||
9 | Anybus | CompactCom 40 Modbus-TCP |
54 | 08.12.2023 | ||
10 | NordicTrack | AudioStrider 990 PRO NTEL09811.2 |
32 | 09.03.2024 |