Universal Innovations Sahara X450 Manual 

9, Universal Innovations Sahara X450 9 Assembly Step 6 Fit front cross bar and rear cross bar using 8 M4x10 bolts (Ref D). Make sure front cross bar (with magnet) is placed at front of barbecue. Rear Cross Bar Front Cross Bar Secure chain to front access panel with 1 M6x12 bolt (Ref A). M4x10 Bolt (Ref D) M6x12 Bolt (Ref A) …

19, End of Cooking Session After each cooking session, turn the barbecue burners to the ‘high’ position and burn for 5 minutes. This procedure will burn o cooking residue, thus making cleaning easier. Do not use any abrasive materials. Turning O Your Barbecue When you have �…

13, 13 Assembly Step 10 1. Fit Rotisserie Motor Bracket to sink panel as shown using the 2 pretted screws and nuts. 2. Fit Rotisserie Handle Bracket to sink panel as shown using the 2 pretted screws and nuts. 3. Slide Rotisserie Motor onto Rotisserie Motor Bracket. 1. 2. 3. Rotisserie Mot…

3, 3 M6x12 Bolt M6x16 Bolt M6 Washer M4x10 Bolt 35 4 4 8 Tools Required For Assembly • Allen Key (supplied) • Adjustable Spanner Before You Start • Check the contents of the box and make sure you have all the parts and ttings listed. If not, contact our Helpline on 00 353 1 2873797 and…

2, Parts Supplied Ref Description Illustration Qty Ref Description Illustration Qty 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Large Wheel Castor Wheel Cabinet Base Cabinet Base Plate Cylinder Rack Left + Right Sid…

7, 7 Assembly Step 4 Turn barbecue cabinet base over (large wheels on left hand side). Position cabinet base plate and cylinder rack as shown. Note: place cabinet base plate rst. Use 4 M6x16 bolts (Ref B) and 4 M6 Washers (Ref C) to secure cylinder rack and one side of cabinet base plate. Use 2 …