Unitron Johansson UNIVERSE 8600 Operation & User’s Manual

2, UNIVERSE (REF. 8600) 2 No part of this manual may be copied, reproduced, transmitted, transcribed or translated into any language without permission. Unitron reserves the right to change the specifications of the hardware and software described in these ma…

15, Unitron Johansson UNIVERSE 8600 UNIVERSE (REF. 8600) 15 Single Cable (EN 50494) and (EN 50607) LO Frequency (kHz): The LO Frequency used in the LNB. Set this to 0 when intermediate frequencies (IF) are used for tuning. This setting will be filled in automatically when choosing the Un…

18, UNIVERSE (REF. 8600) 18 3.2.4 CAM The CAM menu will open automatically in a few seconds, if it doesn’t you can click the “(Re)open CAM Menu” button. To use the CAM menu click on the menu item you want to open and click on “Return” to go back 1 …

12, UNIVERSE (REF. 8600) 12 3.2.1. Device Information Device Information gives some basic information about the device. Here you can find the serial number, firmware version, the release date of the firmware and the hardware version. This is useful for…

26, UNIVERSE (REF. 8600) 26 GENERAL CI slot - 1 Input voltage VDC 12-20 Power consumption W 7 (without CAM and without remote power) DC jack mm Ø 2.1 Powering remote units - Yes, 1 unit can power other units Operating temperature °C…

25, UNIVERSE (REF. 8600) 25 4 TECHNICAL SPECIFICATIONS 8600 – Universe INPUT Number of inputs - 1 with passive loop-through (-2dB) Tuner - 1 Frequency Range MHz 42 – 2150 Input level dBm -65 to -20 Standard - DVB-S/…