Unique Gas Products UGP-30E CT2 Installation Instructions Manual

3, UGP-30E – CT2 8 It is the responsibility of the installer to make certain that the rangetop is properly adjusted at the time of installation. Situations caused by improper adjustments or improper installation are not covered under the warranty. Any expenses incurred due to such s…

2, UGP-30E – CT2 7 The installation of rangetops designed for recreational vehicle installation must conform with state or other codes or, in the absence of such codes, with the standard for recreational vehicles. ANSI A119.2.2–1982 in the U.S.A. or CAN/CGA Z240.4.2 in Canada. …

7, Unique Gas Products UGP-30E CT2 UGP-30E – CT2 12 Make the countertop cut-out following the dimensions given in the illustration above. Base below rangetop must be of a non-combustible material. …

1, UGP-30E – CT2 6 Installation Instructions Be sure the rangetop is properly installed and grounded by a qualified technician. It is the responsibility of the technician to make certain that your rangetop is properly installed. Situations cause by improper installation are not co…

6, UGP-30E – CT2 11 high. There must be a minimum of 6” (15.2 cm) side clearance from the rangetop to such combustible surfaces above the 36” (91.4 cm) counter height.  Within the 6” (15.2 cm) side clearance to combustible vertical surfaces above 36” (91.4 cm), the maximum…