RLE Technologies Falcon Wi-MGR Operation & User’s Manual

32, 32 Wi-MGR User Guide 800.518.1519 3 Web Interface Source Uneditable; displays to the user where the signal is coming from. 418 is broadcasted from the common sensor 418MHz Point Six Wireless sensor. A 900 means it is being broadcasted from a Point Repeater (Wi-PR) or a 900MHz Point S…

33, rletech.com Wi-MGR User Guide 33 3 Web Interface Low Humidity Alarm Threshold Enter a low humidity alarm threshold - if the humidity drops below this value, a low humidity alarm is generated. Alarm Delay The number of seconds that pass between the time the system goes into alarm and …

56, 56 Wi-MGR User Guide 800.518.1519 3 Web Interface 3.5.9 Com Port1/Modbus/Bacnet If the Wi-MGR will communicate via the EIA-485 port, configure the necessary options here. Figure 3.16 Com Port1/Modbus/Bacnet Configuration Page Option Description EIA-485 Select EIA-485 Port Function Set the o…

13, rletech.com Wi-MGR User Guide 13 C HAPTER CHAP TER 0GETTING STARTED 2.1. Installation The Wi-MGR can be rack or wall mounted, or left free standing. RLE manufactures two different types of mounting brackets for the Wi-MGR: ♦ The Wi-MGR comes with two L-shaped rack mount tabs. The…

71, rletech.com Wi-MGR User Guide 71 B Troubleshooting Sensors that you have NOT installed appear on the Wi-MGR’s home page. This issue may occur when wireless sensors are used in conjunction with an Wi-MGR. When you installed your sensors, the automatic Sensor Discovery feature on the Wi-…

16, RLE Technologies Falcon Wi-MGR 16 Wi-MGR User Guide 800.815.1519 2 Getting Started 2.3. Connectivity 2.3.1 RJ45 Ethernet Connection The Wi-MGR has an internal 10/100BASE-T Ethernet port that is used for configuration. The Ethernet port supports Web browser access, email (SMTP), BACnet slave, Modbus slave, and SNMP. The de…