Thermo King 98212 Maintenance Manual

45, Controller Description 43 Indicator LEDs Two status indicator LEDs are located just under the F1-F4 function keys Three Special Function Keys The Special Function keys are located around the TK Logo. These special function key allow the operator to move quickly to perform a specific functi…

231, Diagnosis: Troubleshooting, Warnings and Alarm Codes 229 07 Compressor Current Too Low • Occurs during pretrip (PTI) or function test only. • During compressor test, if Compressor power consumption is 25% below expected current draw or compressor phase current level differs 33% or more…

123, Main Menu 121 Changing the AFAM+ Settings Using ‘OPTISET’ 1. Press the MENU F4 key to enter the main menu. Press the F2 or F3 key to scroll to Setpoint/Control Menu and Press F4 to expand the menu. 2. Press the F2 or F3 key to scroll to Optiset Menu. 3. Press F4 key. The foll…

21, Specifications 19 Normal R-404A System Operating Pressures (Scroll Compressor) Container Temp. Operating Mode Ambient Temp. Suction Pressure Discharge Pressure 21 C (70 F) Cool 27 to 38 C, 80 to 100 F 410 to 670 kPa, 4.10 to 6.70 bar, 59 to 97 psig 2140 to 2650 kPa, 21.40 to 2…

152, Thermo King 98212 Controller Maintenance 150 Software File Format SIP In version 3.0.0.0 we introduced the SIP file format for adding options like RMM to the unit. Version 3.1.0.0 120612 and later were released in this SIP format. CM4000_3.1.0.0.120612.srip.sip In order to load version 3.1.0.0 or lat…

153, Controller Maintenance 151 MP-4000 Test System Tool The MP-4000 Test System Tool has the ability to test the following components: • Controller Module (CM) • Power Module (PM) • Interconnect Cable •Keypad • Displays IMPORTANT: As of February 1st, 2012, no failed Controller Module…