Rigol RP1018H Operation & User’s Manual

1, RIGOL User’s Guide  Publication Number: UGE22X00-1110 RP1018H RP1018H High Voltage Probe Sept. 2013 © 2013 RIGOL Technologies, Inc. All Rights Reserved. …

5, Rigol RP1018H -8- CAUTION 1) Please use function signal generator to output 20 Vp-p, 200 Hz square waveform. 2) Non-professionals do not adjust the Hole 2 and Hole 3. 3) This product is already adjusting Hole 2 and Hole 3. Please feel free to operation. 4) Use the adjust bar attached …

6, -9- voltmeter reading. 5) Disconnect the probe tip from the high voltage source before removing the ground clip. 6. Cleaning Clean only the exterior probe body and cables. Use a soft cotton cloth lightly moistened with alcohol and water. Do not allow any portion of the …

2, 目录 Contents 1. 规格 ..........................................................................................................1 2. 安全须知....................................................................................................1 3. 操作说明.......…

4, -7- Do not work alone when working with high voltage circuits. For your own safety, inspect the probes for cracks and frayed or broken leads before each use. If defects are noted, DO NOT USE the probe. Hands, shoes, floor and work bench must be dry. Avoid making measurements under humid, damp o…

7, -10- 8. Accessories Test CRT for H.V. Adjust bar Carrying Box Contact Us If you have any problem or requirement when using our products or this manual, please contact RIGOL. E-mail: [email protected] Websites: …