Teseq PA 5740 Operation & User’s Manual

10, Teseq PA 5740 10 PA 5740 - Automotive battery simulators 2.6 Operating personnel The test system should only be operated by qualied personnel. Making set- tings, maintenance work and repairs on an opened device can only be carried out by the appropriately trained personnel. Teseq and its rep…

5, 5 1.1 Introduction The PA 5740 range of battery simulators is high performance power ampli er providing a stable and rugged power source for laboratory applications. The ampli er has been designed speci cally to simulate battery supplies. Such as 12, 24 and 42 V vehicl…

9, 92.3 Excess voltage category The test equipment PA 5740, as described in this manual, is related to the excess voltage category II according IEC 60664. 2.4 Application area These instructions apply to the entire system. Other safety regulations for com- ponents used or devices addition…

13, 13 DANGER! Danger to life by interruption of the grounding! If the grounding is interrupted inside or outside the equipment, the PA 5740 will become a source of danger. Follow the regulations for the grounding of the system. 3.4 PA 5740 Front panel connectors 3.4.1 The cont…

27, 27 7 sPeCiFiCAtions Temperature range: Operation at +10 to +40°C storage at -10 to +60°C Humidity: 30 to 75% (non condensing) Air pressure: 860 to 1060 hPa Protection class: IP20 7.1 Environmental conditions 7.2 Technical capabilities General PA 5740 Forward voltage g…