Terex Z-30/20N Operator's Manual

22, Operator's Manual Fifth Edition • Second Printing 20 Z-30/20N • Z-30/20N RJ Part No. 133546 Workplace Inspection Workplace Inspection Be aware of and avoid the following hazardous situations: · drop-offs or holes · bumps, floor obstructions or debris · sloped surfaces …

12, Operator's Manual Fifth Edition • Second Printing 10 Z-30/20N • Z-30/20N RJ Part No. 133546 Legend 1 Non-steer tire 2 Battery box 3 Steer tire 4 Power to charger (between steer tires) 5 Ground controls 6 Secondary boom 7 Primary boom 8 Jib boom 9 Platform controls 10 Pla…

19, Operator's Manual Fifth Edition • Second Printing Part No. 133546 Z-30/20N • Z-30/20N RJ 17 FUNCTION TESTS Test Machine Functions 18 Press down the foot switch. 19 Activate each machine function toggle switch. Result: All boom/platform functions should operate through a full cy…

16, Terex Z-30/20N Operator's Manual Fifth Edition • Second Printing 14 Z-30/20N • Z-30/20N RJ Part No. 133546 Check the Batteries Proper battery condition is essential to good machine performance and operational safety. Improper fluid levels or damaged cables and connections can result in component damage …

36, Operator's Manual Fifth Edition • Second Printing 34 Z-30/20N • Z-30/20N RJ Part No. 133546 Z-30/20N with rotating jib Height, working maximum 35 ft 2 in 10.7 m Height, platform maximum 29 ft 2 in 8.8 m Height, stowed maximum 6 ft 7 in 2 m Horizontal reach maximum 21 ft 6.4 m Width 3 ft 1…

26, Operator's Manual Fifth Edition • Second Printing 24 Z-30/20N • Z-30/20N RJ Part No. 133546 Light on indicates that the boom has moved past either non-steer wheel and the drive function has been interrupted. To drive, hold the drive enable switch up or down and slowly move the drive con…