RAB Lighting BLED5 Square Installation Instructions Manual

1, RAB Lighting BLED5 Square BLED5 INSTALLATION INSTRUCTIONS IMPORTANT READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safe…

2, BLED5 INSTALLATION INSTRUCTIONS MOUNTING fIXTURES For BLED5 & BLEDR5 the window is available on one side of Bollard. Secure Bollard before installing the housing. 1. Loosen Housing Screws and remove Mounting Plate. Screws will remain in place with O-ring retaining gaskets. Fixture …

3, BLED5 INSTALLATION INSTRUCTIONS BLED5-IN-0612 MOUNTING fIXTURES For BLED2x5 & BLEDR2x5, cutouts are provided on both sides of Bollard. Secure Bollard before installing the housings. 1. Loosen Housing Screws and remove Mounting Plate. Screws will remain in place with O-ring retaining gaskets…

4, BLED5 INSTALLATION INSTRUCTIONS ACCESSORIES Bollard base: BOLBASE Bollard base Retro kit: BOLBASE RETRO Sufx “Y” = Warm 3000K LED Sufx “N” = Neutral 4000K LED, WIRING Universal driver permits 120V to 240V, 50 or 60Hz. 1. Connect the black xture lead to the (+) LIN…

5, BLED5 INSTALLATION INSTRUCTIONS BLED5Y Warm LED Square Steplight BLEDR5Y Warm LED Round Steplight BLED5N Neutral LED Square Steplight BLEDR5N Neutral LED Round Steplight …

6, BLED5 INSTALLATION INSTRUCTIONS ANCHOR BOLT TEMPLATE fOR BLED BOLLARD Conrm dimensions before using as a template. If possible use the actual mounting plate as your template. …