Outback I100 Assembly And Operating Instructions Manual

14, Outback I100 14 5 Carefully fit the bottom panel assembly into the base of module. Then secure using the two Wing Bolts (B2x2pcs) of both left/right Side Panels. B2 Top view …

23, 23 out. The time between cleaning may need to be reduced if very fatty foods or cheap meat products are being cooked. Failure to do this may result in a fat fire, which may cause injury and could seriously damage the barbecue. In the event of a fat fire: • If safe to do so, tu…

26, 26 Troubleshooting Manufacturer: TPA Industrial (DG) Co. Ltd. Xingguang Rd., Huangjiang, Dongguan Guangdong, China 523768 Problem Possible Cause Solution Burner will not light using the ignition system LP gas bottle is empty Replace with full bottle Faulty regulator H…

11, 11 I100 Hardware Reference Diagram Specifications subject to change without prior notice. B1 B2 B3 M8x25 Wing Bolt 3PCS M8x45 Wing Bolt 8PCS M8x60 Wing Bolt 2PCS …

25, 25 Technical Specifications Specifications subject to change without prior notice. NOTES: CE Approval Heat Input Burners Injector Size Gas /Pressure Main Burner 0359 359BR665 4 0.95mm Butane: 28-30mbar Propan…