Nvidia Quadro VCA Manager Installation Manual

18, 5 Software installation 5.2 System setup using the VCA Manager 5 Software installation 5.1 System setup using Linux commands When booting and the Quadro VCA is connected on interface eth3 to local network DHCP will be used by default. A unique hostname is preset. To change the default sett…

29, 5.8 Testing the installation 5 Software installation 5.8 Testing the installation 5.8.1 VCA Manager tests To test the installation: 1 Connect a browser to the VCA’s IP address. In the browser’s address input window, enter: https://VCA-IP-address (using the IP address or hostname of your VCA)…

28, 5 Software installation 5.7 Installing third-party software 2 Create a run script and copy it into /home/iray/cm/satellite. For more information, refer to "Setting up a third-party run script" (page 24). 3 Add the run script to the VCA Manager database, which stores all persistent infor-…

20, 5 Software installation 5.2 System setup using the VCA Manager 6 Change administrator password of the VCA Manager (default is admin:admin). VCA Manager admin password 7 Change network parameters for network interfaces to either a static IP address or a DHCP address. A VCA Manager restart is neces…

24, 5 Software installation 5.5 Iray Queue Manager setup sudo yum –disablerepo="*local*" install "nvidia-vca-iray-server*" The latest version of Iray Queue Manager is installed. 3 From the VCA Manager home page, click the link Go to Queue, which is near the top of the page. The…

9, Nvidia Quadro VCA Manager 3.1 Hardware 3 Quadro VCA specification Alert modes • A blue LED identifies the system using the Intelligent Platform Management Interface (IPMI). • A red LED indicates a hardware error such as a power failure, fan failure, or overheat- ing. Color Alert LED Behavior Status D…