KXD KXD-Q3 Operation & User’s Manual

4, installation material being used ,and periodic safety inspection of all installation material and the fixture. If you lack these qualifications , Do not attempt the installation yourself ,improper installation can result in bodily injury. Be sure to complete all rigging and installatio…

8, KXD KXD-Q3 Prism System Info Current Time Total Time Current Mode Temperature Software Version Manual Control PAN PAN =000 PAN-FINE PAN-Fine =000 TILT TILT =000 TILT-FINE TILT-Fine =000 Pan/Tilt Speed Move Speed =000 Dimmer Dimmer =000 Strobe Strobe =000 Color fixed Gobo Wheel …

13, 033-058 X/Y auto run 2 059-084 X/Y auto run 3 085-110 X/Y auto run 4 111-136 X/Y auto run 5 137-162 X/Y auto run 6 163-188 X/Y auto run 7 189-214 X/Y auto run 8 215-240 X/Y auto run 9 241-255 X/Y Sound Control 16 250-255 RESET(10S) …

9, With this function you can display the DMX 512 value of each channel. The display automatically shows the channel with a value changing. 5.2 Run Mode The LED moving head have 6CH and 15CH, can receive the International DMX signal. In the【Run】mode，you can chose【Master】mode [ S…

7, 4 :MENU FUNCTION DMX Address 001~512 Operating Mode DMX 6 Ch DMX 16 Ch Auto Perform Mode 1 Perform Mode 2 Perform Mode 3 Perform Mode 4 Perform Mode 5 Perform Mode 6 Perform Mode 7 Perform Mode 8 Sound Master Auto Perform Mode 1 Perform Mode 2 Perform Mode 3 Perform Mode 4…

6, recommended to use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an XLR plug with a 120 resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the last fixture in the chain.…