Pakedge NK-1 Operation & User’s Manual

8, NK-1 Wireless Controller User Guide 8 5. To change your login credentials (strongly recommended), click Edit Password or Edit Security Questions. 6. Click Next. Here you can edit each AP’s location, view each serial number, IP address, MAC address, channel, and power…

17, NK-1 Wireless Controller User Guide 17 You can set up one guest SSID per band. Please note that guest SSIDs do not depend on the router settings (such as VLANs). The Guest Network is designed for routers that do not support VLANs. The Guest Network acts as its own network w…

20, NK-1 Wireless Controller User Guide 20 3. To update the NK-1 firmware from a firmware file that has been downloaded onto your computer, click Upload Firmware, click Choose File, navigate to the firmware update file, then click OK. Viewing and updating license information…

5, Pakedge NK-1 NK-1 Wireless Controller User Guide 5 Configuring the NK-1 through your network router If you are using a router that has an internal IP scheme of 192.168.1.x, then you can connect the controller to an available port on your router or network switch and run the wizard. …

6, NK-1 Wireless Controller User Guide 6 6. After you have logged into the controller, you will see the Home screen. Important: The first time you log in, the Setup Wizard starts. Go to “Running the wizard” on page 7. 7. Click Settings, or click the Home screen’s Settings icon. …