NSS eForce Operation Manual

8, 8 Touch Pad Screens Splash Screen. Stays on the screen for nominally two seconds and then switches to the next screen. Seat belt Screen. Always wear your seat belt when using this machine. Push OK to continue to the next screen. …

20, 20 TROUBLE SHOOTING CHART Problem Cause Solution Machine will not turn on. Battery pack is not plugged into machine. Open the battery cover and plug the battery pack into the machine. Battery charger is plugged into AC outlet. Unplug the battery charger. The 2 amp…

4, 4 Table of Contents IMPORTANT SAFETY INSTRUCTIONS ..................................................................................................................... 2 INTENDED USE .........................................................................................…

16, NSS eForce 16 Pad Pressure Adjustment The NSS eForce Burnisher is preset at the factory for medium duty applications. It can be tuned to your specific application for optimum performance. ONLY an authorized NSS Service Station should perform this adjustment. Tools required for Pad pressure a…

19, 19 Operating the Battery Charger The battery charger is fully automatic. Simply plug the charger into a suitable wall outlet, and the charger will charge the batteries. The amp meter on the right side will start with high amp output and drop to 0 when complete. A bubbling, or boili…