Oreck 8143 Service Manual

7, Increase Quality Through Interaction with the Field iv. Twisted Fan- Determine if the fan is twisted (the blades should be horizontal). You can untwist the fan by gently turning the ends so the blades straighten out (this has eliminated ticking v. Bent Fan-some service fans get bowed from…

15, Increase Quality Through Interaction with the Field 5. Touch the other lead to the back of the power switch where the black, (brown or blue) and red. 6. If you get a ∞ reading in any position then the motor is bad. 7. Check the Interlock/Safety switch by removing the two …

14, Increase Quality Through Interaction with the Field 4. You should get a 0 reading in each of the three On positions. 5. If you get an ∞ (infinite) reading the problem is either with the power switch, wiring including cord, safety switch or safety switch actuator. 6. Che…

1, Increase Quality Through Interaction with the Field Increase Quality Through Interaction with the Field 1 The Oreck Manufacturing Company 8143 Air Purifier Tune-Up & Service Guide 07/20/2005 …

20, Increase Quality Through Interaction with the Field 5. Tie-wrap all leads together and position the connectors so they will not contact the top housing (Fig E). E 6. Perform the tests in Tune-Up to assure successful repair. 7. Reassemble unit. Increase Quality …

11, Oreck 8143 Increase Quality Through Interaction with the Field 9. Check the Structural Integrity of the Cell a. Remove the cell from the unit b. Remove the Pre-filter from the Precipitator cell and place in a soap bath. Gently clean, rinse and dry. c. Remove Odor (Carbon) Abso…