Lowell UPS9-1000 User & Installation Manual

32, Lowell UPS9 Series Manual Pg. 32 Rack Installation (with 4-point rail kit): Step 1: Mount the 4-point rail kit to the rack. Use the (8) 10-32 screws provided to mount left and right support rails (front and rear). Step 2: Attach the mounting brackets to the unit. CAUTION—DO…

36, Lowell UPS9 Series Manual Pg. 36 Step 7: Connect all batteries following the Wiring Diagram in the next section. Step 8: Put all batteries inside and secure in place with hold down brackets. Step 9: Replace the metal top cover on the unit. Close the front xing plate and the tw…

25, Lowell UPS9 Series Manual Pg. 25 Storage Temperature Recharge Frequency Charging Duration –13˚F to 104˚F (–25˚C to 40˚C) Every 3 months 1–2 hours 104˚F to 113˚F (40˚C to 45˚C) Every 2 months 1–2 hours STORAGE & MAINTENANCE Storage Before storing, charge the UPS a…

17, Lowell UPS9-1000 Lowell UPS9 Series Manual Pg. 17 Abbreviation Display Meaning ENA Enable DIS Disable ESC Escape RAC Rack Display TOE Tower Display B.L Low Battery O.L Overload N.C Battery is not connected O.C Overcharge S.F Site Fault E.P EPO T.P Over Temperature C.H Charger Failure B.B Battery Fault F. U Fr…

16, Lowell UPS9 Series Manual Pg. 16 Display Function Backup Time Information Indicates the backup time in pie chart. Indicates the backup time in numbers. H: hours, M: minutes Warning & Fault Information Indicates that the warning and fault occurs. Indicates the warning fault codes, which a…

31, Lowell UPS9 Series Manual Pg. 31 Product Overview & Set Up NOTE: Before installation, inspect the unit. Be sure that nothing inside the package is damaged. Keep the original package in a safe place for future use. Rear Panel View: 1. DC connector: Connects to either UPS or second batter…