OPTO 22 PCI-AC51 Operation & User’s Manual

17, CHAPTER 3: INSTALLING AND USING THE SDK PCI-AC51 and PCIe-AC51 User’s Guide 13 13 6. For output modules, select each point that is an output... ...and then click Configure Selected Points As Outputs . The selected points are now configured as output points. NOTE: When a Pamux brain power…

10, OPTO 22 PCI-AC51 INSTALLING THE PCIE-AC51 PCI-AC51 and PCIe-AC51 User’s Guide 6 4. Attach the cable to the adapter card. 5. Connect the other end of the cable to the I/O mounting rack. See form 0726, the Pamux User’s Guide, for more information. 6. Reinstall the power cord. If you wish, leave …

21, CHAPTER 3: INSTALLING AND USING THE SDK PCI-AC51 and PCIe-AC51 User’s Guide 17 17 PCI Express Slot Width. While Opto 22’s PCI-Express adapter cards are a 1x form factor, they may be installed in wider PCI-Express sockets, like 4x, 8x, and 16x. For expansion slot availability, see the user�…

6, WHAT’S IN THIS GUIDE PCI-AC51 and PCIe-AC51 User’s Guide 2 What’s in this Guide This guide assumes that you are familiar with Pamux and the brains, racks, and input/output modules used with Pamux. For more information about Pamux, see form 0726, Pamux User’s Guide. If you are a softwa…

28, LEDS PCI-AC51 and PCIe-AC51 User’s Guide 24 LEDs PCI-AC51 • Reset —Indicates the state of the reset line, which can be either High or Low (On = High). • Hardware —Blinks when the PCI-AC51 is accessed. • Write —Blinks when a Pamux write is executed. •Read —Blinks when…