Noritz NC199-OD Owner's Manual

18, 18 * The indicator is lit. * The previously set hot water supply temperature is shown. 1 button is "ON". 2 Set the temperature using the buttons inside the cover . (Ex.: 110°F) (Ex.: 105°F) Cover shown in the open position. * If is displayed, hot wa…

30, 30 * Open the lid closest to the spout to allow for filling. Close the lid. Confirm that the stopper is closed. (Example of bathtub filled with hot water.) 1 * The indicator is lit. 2 (Ex: Home screen) Check 1) 2) (Ex: Alarm off) 3 1) 2) (Ex: 45 gal) 10 15 20 25 30 35 40 45 50 55 60 70 80 …

36, 36 Periodic Maintenance Regular Maintenance-2 If the water drain valve (with water lter) is covered with debris, the hot water may not run smoothly, or the unit may put out cold water. Check and clean the lter as explained below. * To avoid burns, wait until the equipment cools down befo…

28, Noritz NC199-OD 28 This example describes setting the recirculation system to operate between 5:00 am - 8:00 am. 1 2 3 Here 1) 2) 1) 2) (Example of a display) 1) 2) * With the recirculation operation timer set, hot water will be automatically circulated in the hot water pipes. Even with this function acti…

31, 31 Single Water Heater Only Flow Meter Alarm 4 Turn on hot water. 5 When the bathtub fills with the preset volume of water, an alarm will sound alerting you to shut off the water. I will go to turn of f. Pi Pi ! The highest temperature Lit during combustion Hot Water Filling Temperature…

21, 21 For All Systems Automatic Water Heater “ON” or “OFF” Operation Activate Automatic Operation 4 * If you do not press button, the time setting is not completed. * If you want to change "ON/OFF time", select "Reset" and then pres…