Microh OMNI HZR Operation & User’s Manual

7, Set Up Be sure the unit is unplugged from the power source, remove the cap from the tank, and add the `MAXIMUM` fog  uid up to the  uid line. Be sure to not over ll the tank. Replace the cap and plug unit in. Turn the power switch on; you will notice the tank lights up red. O…

3, Introduction Thank you for purchasing the MICROH OMNI HZR xture. For your own safety and knowledge, please read this manual before installing or operating this device. This manual covers the important information on installation and applications. Please install and operate t…

5, Operation • Do not operate this product if you see damage to the housing, uid tank, or cables. Have the damaged parts replaced by an authorized technician at once. • Be sure that no ventilation slots on the product’s housing are blocked. • The fog exits the nozzle at a very …

6, Mounting and Installation Caution: For added protection, mount the xtures in areas outside walking paths, seating areas, or in areas were the xture might be reached by unauthorized personnel. Before mounting the xture to any surface, make sure that the inst…

10, Maintenance and Cleaning The following points have to be considered during the inspection: 1. All screws for installing the device, or parts of the device must be tightly connected, and must not be corroded. 2. There must not be any deformations on the housing, colour l…