MICRO-EPSILON ILD1402-5 Instruction Manual

51, Page 51 Serial Interface RS422 optoNCDT 1402 Format: 31 24 23 16 15 8 7 0 hex „+“ „+“ „+“ 0x0d („CR“) 0x2B2B2B0D „l“ „L“ „D“ „1“ 0x494C4431 0x20 0x7F 0x00 0x04 0x207F0004 0x00 0x00 0x00 0x0X 0x0000000X 0x00 0x00 0x00 0xXX 0x000000XX Reply: 31 24 23 16 15…

63, Page 63 Serial Interface RS422 optoNCDT 1402 Reset Sensor8.3.20 Name: RESET_BOOT Description: Starts the sensor’s initialization phase. Duration about 900 ms. Procedure: The sensor replies and then re-boots. The string of the boot message contains “CI140x“, “CR“ “LF“ and the …

5, optoNCDT 1402 8.3.4 Reading the Sensor Settings ........................................................................................................................... 47 8.3.5 Average Type and Average Number .................................................................................…

39, Page 39 Serial Interface RS422 optoNCDT 1402 Reading the Software Version8.2.4 Name: VERSION Description: The sensor transmitts the software version. Format Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 Byte 8 Byte 9 “+” “+” “+” 0x0D „I“ „L“ 0x09 0x00 none Reply Byte 1 B…

14, MICRO-EPSILON ILD1402-5 Page 14 Functional Principle, Technical Data optoNCDT 1402 Technical Data3.3 Model ILD 1402-5 1402-10 1402-20 1402-50 1402-100 1402-200 1402-250VT 1402-600 Measurement range mm 5 10 20 50 100 200 250 600 Start of range mm 20 20 30 45 50 60 100 200 Midrange mm 22.5 25 40 70…

42, Page 42 Serial Interface RS422 optoNCDT 1402 Reply Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 „I“ „L“ 0x81 0x00 none Command error-free Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 “I“ “L“ 0xC1 0x01 Error code Faulty command Data Protocol ILD14028.2.9 Name: SET_CIMODE_1402 Descriptio…