Key Digital KD-4x4CSK Operating Instructions Manual

4, 4 5 Connections, Buttons & LEDs Rear Panel Connections All connections to the KD-4x4CSK/KD-8x8CSK are found on the rear panel of the units. Refer to the illustrations below for port assignments while making connections. Power Serial IR RS-232 HDMI Inputs & LEDs HDMI &…

7, 10 11 Important Product Warnings: 1. Connect all cables before providing power to the unit. 2. Test for proper operation before securing unit behind walls or in hard to access spaces. 3. If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support with bolts o…

5, 6 7 Switching To execute a switching command, first select the output you wish to switch (1), and then select the desired input (2). EDID Control The KD-4x4CSK/KD-8x8CSK have a built-in library of 15 EDID settings and the ability to copy EDID data from any output specified via IR and RS-2…

6, Key Digital KD-4x4CSK 8 9 Response from Status command (current settings and/or status of unit): Specifications Technical: » Input (Each): 1 HDMI Connector, Type A, 19 Pin Female » Output (Each): 1 HDMI Connector, Type A, 19 Pin Female; 3.5 mm stereo jack connector for Analog L/R Output; RCA Jack for Digital…

3, 2 3 Quick Setup Guide 1. Begin with the KD-4x4CSK/KD-8x8CSK and all input/output devices turned off with power cables removed. 2. Connect HDMI sources to the appropriate input ports on the KD-8x8CSK. 3. Connect display devices to the HDMI output ports and audio devices to audi…