KERN OZG 497 Manual, User Instructions

5, OZG_497-BA-e-1510 4 1.3 Storage You should ensure that the device is not exposed to direct sunlight, temperatures which are too high or too low, vibrations, dust or a high level of humidity. The ideal temperature range is between 0 and 40°C and a relative humidity …

12, KERN OZG 497 11 OZG_497-BA-e-1510 5 Operation and functionality 5.1 Getting started After assembly, if the microscope is ready for use, then you must first establish a power connection using the cable which is connected to the device. Please see section 5.7 for more details on adjus…

4, 3 OZG_497-BA-e-1510 1 Before use 1.1 General notes You must open the packaging carefully, to make sure that none of the accessories in the packaging fall on the floor and get broken. In general, microscopes should always be handled carefully because they a…

14, 13 OZG_497-BA-e-1510 5.5 Adjusting the stand Torque of the focus wheels You adjust the torque of the focus wheels by holding one of the two wheels in place and using the other hand to turn the other wheel. Depending on the direction of the turn, the torque will be increase…

10, 9 OZG_497-BA-e-1510 4 Assembly The first step is to position the microscope stand on a firm, level surface. The holder is firmly attached to the pillar of the stand. You can then fit the microscope head to the holder, by passing the objective through the holder …

6, 5 OZG_497-BA-e-1510 1.4 Maintenance and cleaning In any event, the device must be kept clean and dusted regularly. If any moisture should be occur, before you wipe down the device you must ensure that the mains power is switched off. When glass components become dirty, th…