LEM ISO plus Operating Instructions Manual

22, Advanced functions - 22 - 6.4 LIMIT (Alarm) The limit (alarm) function is activated with the key and can be used to detect when a value exceeds or falls below user definable thresholds. Exceeding the limit values is reported on the display and by the buzzer (the lower lim…

4, Safety Regulations - 4 - 1 Safety Regulations • Safety warnings and precautions must be read and understood before the instrument is used. They must be observed during use. Operating electrical devices implies that parts of the device carry dangerous voltages. Disregarding…

31, Upkeep and Maintanance - 31 - 9 Upkeep and Maintenance If the instrument is operated and handled properly it does not need specific maintenance and service. Maintenance work must only be undertaken by trained and qualified staff and during the warranty period only by authorized service cent…

23, Advanced functions - 23 - 6.5 REC (Record) The key activates the Min/Max/Average recording function. The display contiues to display the current value. When in REC mode the key cycles between Minimum, Maximum, Average and current readings. Maximum evalu…

6, LEM ISO plus Instrument features - 6 - 2 Instrument features This instrument has been manufactured complying with Quality Assurance System DIN ISO 9001. The compliance with the current applicable EMC-regulations is indicated by the CE-sign and markings on the instrument. Two instruments i…

26, Technical Data - 26 - 8 Technical Data 8.1.1 General • European Low Voltage Directives 73/23/EEC and 93/68/EEC • European EMC Directives 89/336/EEC and 93/68/EEC Safety Standards IEC/EN 61010-1:1992/93 + A2:1995 Safety requirements for electrical equipment for measurement…