M-LOCKS EM2050 Operation & User’s Manual

7, M-LOCKS EM2050 7 www.m-locks.com Multi Level Software Locks V03 EN During the open window, the light flashes and the locks beeps, every second. To open the lock, a valid code has to be entered again during the open window. After entering a right code, a double signal sounds. You can unlock the door. If the…

9, 9 www.m-locks.com Multi Level Software Locks V03 EN MANAGER INSTRUCTIONS 8 ACTIVATING USER 1 Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the following actions: For example! 9 8 7 6 5 4 • Enter your personal M…

11, 11 www.m-locks.com Multi Level Software Locks V03 EN Press and hold ‘2’ until a double signal sounds. The LED will illuminate when performing the following actions: For example! 9 8 7 6 5 4 • Enter your personal Manager Code All users are disabled. Please …

12, 12 www.m-locks.com For example! 9 8 7 6 5 4 • Enter your personal Manager Code 1 • Enter User ID of the user that has to be deleted The user has been deleted. To activate user again please refer to function “activate user”. 14 SETTING THE T…

8, 8 www.m-locks.com 7 ACTIVATING SILENT ALARM If, by set up, silent alarm is programmed and the lock is connected to an alarm system. For example! 2 2 2 2 2 3 In case of a hold up situation, a silent alarm can be sent by entering the last digit + 1. If the last …