CoCo ICS-1000 Quick Installation Manual

14, 14 15 Press the red “PAIR“ button, when you have activated the learn mode of the COCO receiver. Refer to the manual of the specic COCO receiver to activate the ‘learn mode’ of the receiver (in most cases, you can press a little button on the receiver for 1 second). Wh…

37, 36 37 IMPORTANT INFORMATION (1) WIRELESS SIGNAL • The 433.92 MHz radio signal passes through walls, windows and doors. • Indoor range: up to 30 m. Outdoor range: up to 70 m (optimal conditions). • The range is dependent on local conditions, such as the presence of…

29, 28 29 5. Set the date and time and click on “Set QuickTimer“. SETTINGS In the bottom right corner, you can nd the “Settings“ icon. When you click on this icon, a screen will appear. Via this screen, you can: • Quickly edit rooms and devices • Congu…

27, 26 27 QUICKTIMERS 1. Select a room, for example: “Living room“. A “QuickTimer“ can be used to automatically perform a command for a specic lamp or device at a specic date and time. For example, you can program a QuickTimer today, to switch on a lamp at 7 AM tomorrow…

10, CoCo ICS-1000 10 11 Step 11: Click on “Room 1“.Step 10: If both codes are correct, this screen will appear. Then click on “Home“. Step 12: Then click on a device, for example “Device 1“. REGISTER YOUR SMARTPHONE/TABLET (continued) …

6, 6 7 1. Go to www.coco-technology. com and click on “My account“ at the top of the screen. 2. On the left side, enter a correct and valid e-mail address and a 4-digit PIN code of your choice. Then, click on “CREATE ACCOUNT“ to create your account. A new page will appear …