Abit SU-2S Operation & User’s Manual

17, Hardware Setup 2-9 2.3.6. Additional USB Port Connection Header (FP-USB1) This header provides two additional USB port connections. Pin Signal Pin Signal 1 VCC 2 VCC 3 - Data 0 4 - Data 1 5 + Data 0 6 + Data 1 7 GND 8 GND 10 NC User’s Manual …

2, Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual. No warranty or representation, either …

32, 3-4 Chapter 3 Head This item configures the numbers of read/write heads. Precomp This item displays the number of cylinders at which to change the write timing. Landing Zone This item displays the number of cylinders specified as the landing zone for the read/write heads. Se…

16, Abit SU-2S 2-8 Chapter 2 2.3.5. PCI Slots (PCI1~PCI5) • PCI1~PCI3: PCI-X 64bit/100MHz • PCI4~PCI5: PCI 32bit/33MHz SU-2S …

53, How to Get Technical Support A-1 Appendix A. How to Get Technical Support (From our website) http://www.abit.com.tw (In North America) http://www.abit-usa.com (In Europe) http://www.abit.nl Thank you for choosing ABIT products. ABIT sells all our products through distributors, …

8, 1-4 Chapter 1 1.3. Jumpers & Connectors Description Jumpers Description Default Setting CCMOS1 CMOS Memory Clearing Header Pins 1-2 Closed (Normal) Connectors Description AUX_FAN1~4 Auxiliary Fan Power Connectors COM2 Connection Header for Additional COM Port CPU_FAN1/…