Genelec 1032C Operating Manual

6, 6 Figure 8. The curves above show the horizontal directivity characteristics of the 1032C. Figure 9. The curves above show the vertical directivity characteristics of the 1032C. Figure 6. The curves above show the effect of the “Bass Tilt”, “Treble Tilt”, “Desktop Low Frequency…

8, Genelec Document D0144R001 Copyright Genelec Oy 3.2017. All data subject to change without prior notice. www.genelec.com International enquiries: Genelec, Olvitie 5 FIN-74100, Iisalmi, Finland Phone +358 17 83881 Fax +358 17 812 267 Email [email protected] In the U.S. please contact: …

5, Genelec 1032C 5 Use with Subwoofers Genelec recommends using the 7300 series subwoofers. For more detailed system configuration and matching products, please consult the on-line Genelec Product Selection Tool at www.genelec.com. Maintenance There are no user serviceable parts inside the monitor. Maintenance …

3, 3 Connect the MAINS INPUT to the mains supply. These products support any mains voltage globally (100-240 VAC, 50-60 Hz) so they can be plugged in anywhere. If the mains power is provided with a generator, inverter or certain lower- quality UPS devices, we recommend filtering of the mains power…

2, 2 Introduction Congratulations and a thank you for the purchase of this Genelec Smart Active Monitor™ (SAM™) system. This manual addresses the stand-alone setup and use of the 1032C SAM monitor. This monitors can also be set up and used with the Genelec Loudspeaker Manager GLM™ and the …

4, 4 The CONTROL NETWORK RJ-45 connectors are used with Genelec Loudspeaker Manager™ (GLM™) network. These connectors are not Ethernet LAN compatible. Do not connect to Ethernet LAN. Stand-Alone Control Functions Bass Roll-Off Control Bass Roll-Off control attenuates the monitor’s ou…