AGFA SNAPSCAN 300 Operation & User’s Manual

61, Appendix B — Using the automatic document feeder 61 Roller cleaning Prolonged use of the ADF may result in an accumulation of ink and other contaminants on the feeder's input roller. This reduces the efficiency of the roller. Check for dirt on the roller if the ADF starts to have tro…

18, Chapter 2 — Installing the scanner for the Macintosh computer 18 Connecting the scanner A SCSI cable is supplied with your scanner. Caution: For safety reasons, never use extension cables for power cords. Always make sure there is only one terminator in…

39, AGFA SNAPSCAN 300 Chapter 4 — Using the scanner 39 6. Select the file agfascan.inf on the CD-ROM and click OK. The installation of the SCSI driver is finished. 7. Remove the CD-ROM from the CD-ROM drive. Installing the software 1. Insert the Software Collection CD-ROM in your CD-ROM drive. Windows should detect t…

27, Chapter 3 — Installing the scanner for the PC 27 5. Touch some metal part of the computer and then remove the SCSI card from its antistatic bag, holding it by its metal support bracket. Static electricity can damage your card. 6. Position the SCSI card in the expansion slot and press dow…

43, Chapter 4 — Using the scanner 43 5. Follow the instructions on the screen. Caution: Do not install EZ-SCSI! Install Adobe Acrobat Reader (to read the documentation), FotoSnap (the easy-to-use scanner driver), and FotoLook (the professional scanner driver). 6. Close the installer p…

19, Chapter 2 — Installing the scanner for the Macintosh computer 19 If you use another SCSI cable than the one provided with your scanner, you have to put a terminator between the connector of your scanner and the SCSI cable as shown on the picture. 5. Snap the diamond shaped wire clips into the cl…