Eyevis EYE-LCD-4600-M-USN-LD-BC Operation & User’s Manual

83, Status Fan 1 Speed Fan 1 Speed 24-63 25 Read Only Fan 2 Speed Fan 2 Speed 24-63 25 Read Only Fan 1 Status Fan 1 Status 0=Not Working 1=Working Read Only Fan 2 Status Fan 2 Status 0=Not Working 1=Working Read Only CPU Temperature CPU Temperature Read Only DVBPM Temperature DVBPM Temperature Read…

34, Controlling the Display The Remote Control The menu functions of the OSD menu can be accessed with the eyevis Remote-Control (RC), see picture below. (To use the RC aim at the display’s IR-Receiver) ► To use the RC connect the IR sensor (see picture on the left) with the IR …

25, Packaging Box content • 1 display unit • 1 power cord • 1 user‘s manual • 1 DVI cord • 1 VGA cord • 1 eyevis display adjustment software on CD • 1 IR remote control • 1 IR remote control sensor Way of packaging The eyevis display is packed in a carton box. To p…

6, About this Manual Read and pay attention to this manual. It contains important information on the product. In particular, note all of the safety instructions and warnings. Keep this manual in a safe place! Warnings used NOTICE Indicates a hazard that could lead to damage or destruction of …

7, Safety/Sicherheit/ Sécurité Safety Safety Precaution Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However…

47, Eyevis EYE-LCD-4600-M-USN-LD-BC Configuration The eyeDeviceSetup software is available to help you configure the devices. The software is stored on the CD provided.  NOTE: The devices have to be configured at the DIP switch before they can be commissioned for the first time. General information The eyeDev…