Expobar BREWTUS IV Manual, Supplemental Instructions

10, 10 5. Brew Pressure Adjustments Rotary Pump CAUTION: Adj usting the pump pressure can be time consuming and since it is very close to the electrical connection on the boiler , we recommend that all adjustment are done when the machine is not plugged in. Note: We recommend that the Rot…

14, Expobar BREWTUS IV 14 Initial Start - Up Instructions Brewtu s IV - R After the machine has been removed from the packaging , place it on a level surface. 1. Remove the white protective covering from the all parts of the machine. 2. Attach the water line f rom the machine to your water line c…

19, 19 1 3 . Cleaning Brewing Components Clea ning the brew head on the lever - style machines is necessary for optimal flavor a nd brewing pleasure. Three different processes are involved with cleaning the brew head : backflush ing with water only, backflush ing with cleaner and…

9, 9 4. Incoming Water Pressure Rotary Pump Machines The Br ewtus IV - R is designed to be used with a water line connection. The pump will work fine off any standard incoming water pressure. The water line can be dropped into a water container , if you like , but you must b…

12, 12 Vibration Pump Machines Note: Set t he brew pressure when the machine is cold to prevent accidental burns. We set up the pump t o obtain a brew pressure of 9 Bars, wit h a flow of approximately 2 ounces in 25 seconds. To se t the brew pressure, insert a backflus…