CHC LT500H Getting Started Manual

8,  Page 7 Reset Key Power Button Power Indicator OK Key Wi-Fi Indicator Power Button - Turn ON: Press the button for 1-2 seconds, the Power Indicator will turn on and the boot screen will appear, and then the LT500 will enter the operation system after 30 seconds. - Turn OFF:…

20,  Page 19 6. START SURVCE5 1. Run SurvCE5 → continue last job or select new/existing job. 2. In [Equip] tab → [3 GPS Rover]. 3. In [Current] tab → [Manufacturer: NMEA GPS Receiver] → [Model: Generic]. 4. In [Comms] tab → [Type: Cable] → [Port: COM6] → [Baud: …

19,  Page 18 9. Select the desired Mount point, then enter the Username and Password. Press [Save] then click on [Login]. NOTE: If the mount point is a virtual reference server, then the LT500T must be tracking satellites. The GGA message must have a valid Latitude and Longitude. If the…

13,  Page 12 4.6. ESTABLISH WIRELESS CONNECTION (GPRS/ WI-FI/ BLUETOOTH) First of all, Press the Windows Button or tap the windows icon → [Settings] → [Connections] → [Wireless Manager] to turn on Bluetooth/Phone/Wi-Fi function. NOTE: The function of Wi-Fi may not available when …

23,  Page 22 CHC - Shanghai HuaCe Navigation Technology Ltd. Building C, NO. 599 Gaojing Road, Qingpu District, 201702 Shanghai, China Tel: +86 21 542 60 273 Fax: +86 21 649 50 963 Email: [email protected] | [email protected] Website: www.chcnav.com …

12, CHC LT500H  Page 11 4. FIRST-TIME OPERATION 4.1. INSERT THE SIM CARD, STORAGE CARD AND BATTERY Refer 3.3 Bottom View to find the SIM card and storage card slot, and then insert the cards into slots correctly. Insert the battery into the battery slot until the latch catch of the batte…