FrontRow JUNO Configuration Manual

19, FrontRow JUNO 16 6. Network / COM Network Configuration Automatic IP Configuration (DHCP) Use this setting to have this device request an IP address from a DHCP server; this should be enabled only if the IT department has a DHCP server online and has set up static (fixed) IP address reservations for FrontRow…

25, 22 For network (NET) commands, we recommend using UDP (“F2”) as the preferred protocol as it tends to be faster. Network (NET) Commands* Syntax: #NET[Connection, String Type. Device ‘Command’]; Name Required/Optional Data Type Format Description Connection Required Variant Fn where n is 1 o…

18, 15 Alert Functions Alert Delivered: When a Conductor HTTP alert call is sent, usually by pressing a button in the classroom (on the wall, in software, or using the mic), this automatically confirms to teachers that the alert was delivered to the Conductor Notifier over the network. Ale…

24, 21 Appendix A: Control commands for the Juno Connect The following commands can be used in Actions to control how a Juno Connect handles audio: ICR-01 Smart Receiver / Juno Connect Master Volume Commands* Syntax: #AUDn[Mute,Volume]; Name Required/Optional Data Type Format Description n Requir…

15, 12 PA Release. Sets how quickly the in-room audio returns to its previous level after the announcement is complete Sensitivity. Sets how sensitive the trigger will be for muting the system. The lower the setting, the lower the sensitivity will be. While music is playing in the classroom, make…