Oracle FS1-2 Customer Service Manual

247, Table 32: Controller LED status and description (back panel) (continued) No. LED LED color Status 3 Network management LED • (Left) Link and Activity LED: Green • (Right) Speed LED: Green, amber, or OFF Indicates these conditions: • Link and Activity LED: • On or blinking �…

252, Oracle FS1-2 Table 36: Drive Enclosure LED status and description (operator panel) LED LED color Status System power indicator Green The status is normal. Module fault indicator Amber A module fault is present. Locate indicator White The DE is located. LED display Green number between 01 and 30 The numer…

167, • The P ower LED emits a steady green light. • The Fault LED is o. • All four Activity LEDs emit a green light for each SAS-2 port that has an SAS interface cable connected to it. Verify the Status of a Drive Enclosure Component 1 From Guided Maintenance, verify that the…

235, Table 24: Drive Enclosure power characteristics Power characteristic Value Maximum output pow er Maximum power consumption depends on the type of Drive Enclosure (DE2-24P or DE2-24C), its size (2U/4U), and conguration. • 4U HDD= 376VA (4TB HDD) • 2U SFF = 260VA (900GB SFF HD…

80, Legend 1 Phillips Number 2 pan head screw with patch lock 4 Remove the front-side caps on both sides of the Drive Enclosure and secure a Phillips 13mm head hex ange screw . Note: The front-side cap on the right side of the Drive Enclosure contains the RFID tag, which uniquely identies t…

224, Slide Pilot to Service Position 1 Extend the rack’s anti-tilt legs. Figure 187: Pilot position during component replacement Legend 1 Rack 2 Pilot chassis 3 Pilot rails 2 Slide the Pilot chassis fully forward until the slide lockout release tabs lock into position. Pilot Replacement Procedure…