CSS Laboratories ProRACK 8020 Series Operation & User’s Manual

13, 1-3 ProRACK 8020 Removable Drive Trays Each drive tray is provided with a keylock and two LEDs. The keylock prevents accidental removal of the tray, and maintains the drive’s connection to the power supply. The LEDs indicate power on status and data access activity of the SCSI drive. …

20, 2-4 ProRACK 8020 Starting Up Follow these steps: 1) Power up all peripherals first, i.e. printer and monitor. 2) Turn the system’s ON/OFF toggle to the ON position. 3) The system will boot, and load its operating system. The system’s BIOS is configured at the factory with default settings. You…

24, 3-4 ProRACK 8020 Using The Power Supplies The power supplies are mounted in a large slide tray on the bottom of the chassis, and are accessible from the rear panel. The ProRACK is available with dual load sharing 400 watt, or 500 watt, 750 watt, or 1000 watt power supplies. The 400 watt…

11, CSS Laboratories ProRACK 8020 Series 1-1 ProRACK 8020 Section 1 - Introduction Overview The ProRACK 8020 Rack Mount System is a hardened industrial grade chassis which supports up to nine 3.5 inch SCSI-3 hot-swappable drives mounted in removable drive trays secured to the chassis by a standard keylock; and a 20- slot…

7, v ProRACK 8020 Table of Contents Section 1 - Introduction Overview ............................................................................ 1-1 The System Case................................................................ 1-2 The Front Panel ...................................…

4, ii ProRACK 8020 FCC Standards The FCC (Federal Communications Commission) restricts the amount of radiation and radio frequency emissions coming from computing equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Par…